XIGMATEK at the moment launched the Poseidon RGB (mannequin: EN42272), an ATX mid-tower case that mixes two tempered glass panels with a lavish use of RGB LED parts. The entrance and left-side panels of this case are tinted tempered glass panels. The entrance panel is accented by a vertical RGB LED strip working alongside the proper facet. XIGMATEK is together with 4 120 mm RGB LED followers with the case, three of those come pre-installed alongside the entrance intakes, and one because the case’s sole rear exhaust. The followers and embedded LED strip function 3-pin addressable-RGB inputs. An included 4-channel RGB LED controller drives the 4, which incorporates a tiny RF distant management that permits you to cycle between presets and toggle particular person lighting. The similar controller doubles up as a 4-channel PWM fan-controller, which takes inputs from the distant. There is a considerably cheaper variant of this case (mannequin: EN42265), which lacks the followers and combi-controller.
The XIGMATEK Poseidon incorporates a typical horizontally-partitioned case format, with the higher compartment holding the motherboard tray that suopports ATX (and smaller) form-factors, whereas the underside compartment holds a double of drive bays and the PSU bay. The case can take add-on playing cards as much as 36 cm in size, CPU coolers as much as 16.5 cm in peak, and PSUs as much as 17 cm in size. Storage areas embody 4 2.5-inch mounts, and two 3.5-inch/2.5-inch trays. Besides the three 120 mm intakes and one 120 mm rear exhaust, the case options two 120 mm high exhausts with a removable mud filter. The case measures 400 mm x 205 mm x 450 mm (LxWxH). Front panel connectivity consists of two every of USB 3.x type-A, and USB 2.0/1.1 ports, and HDA jacks. The firm did not reveal pricing.
Source hyperlink
Post Views:
360
