Thermaltake as we speak rolled out the Toughpower PF1 ARGB of high-end energy provides. Available in three high-Wattage fashions of 850W, 1050W, and 1200W, these PSUs are characterised by their massive 140 mm Riing Duo 14 RGB followers, and addressable RGB LED elaborations alongside either side of the physique, which collectively make up 18 diodes. To management the lighting, the PSU plugs right into a 3-pin addressable RGB header of your motherboard or lighting controller. In the absence of exterior management, you possibly can cycle by means of built-in lighting presets by pushing buttons on the tail finish of the PSU, positioned sufficiently away from the principle AC swap. Another swap positioned near the AC swap, fully turns off the fan.
Aesthetics apart, these PSU have some critical chops: single +12V rail design with 80 Plus Platinum rated effectivity, full DC-to-DC switching, LLC digital management, 100% Japanese capacitors, lively PFC, and most typical electrical safety mechanisms in opposition to over/beneath voltage, over/beneath present, overload, overheat, and short-circuit. You get totally modular cabling, with all three fashions providing two 4+Four pin EPS connectors. The 850W mannequin has as much as six 6+2 pin PCIe connectors, whereas the 1050W and 1200W provide eight. Thermaltake is backing these PSUs with 10-year warranties. The firm did not reveal pricing.
