“We were fortunate enough to have onboarded a team of software developers who were dedicated to the cause and managed to deliver functional software within the set deadline. We promised to deliver the software within 3 months, and here we are. The latest version of the EK-Loop Connect software was tested and confirmed by a small group of beta testers, and today we are ready to present it to the public,” mentioned Edvard König, founding father of EK.
And this isn’t the place the excellent news ends concerning EK-Loop Connect Fan and Addressable RGB controller! Several EK-Loop Connect equipment are additionally able to hit the market. These launches embrace a stream meter, a stage sensor for TBE reservoirs, and a particular USB-A kind cable. In the close to future, it’s also possible to anticipate G1/4″ plug-based thermal sensors to be launched.
EK-Loop Connect – Flow Meter
This minimalistic stream meter permits customers to exactly monitor the stream price of their loop and fine-tune the pump pace for optimum steadiness between acoustics and efficiency. It additionally sends a report if the pump will not be operational, thus stopping overheating of the system and doable malfunctions. It comes outfitted with two G1/4″ ports for simple implementation into the customized liquid cooling loop. The software program additionally permits the consumer to calibrate the readout, making all given numbers an actual illustration of the stream contained in the loop.
EK-Loop Connect – Level Sensor TBE 60
A coolant stage sensor gives a warning when the reservoir reaches some extent the place it could be prudent to high it off. Due to the coolant evaporation by the tubing, it makes certain the pump by no means runs dry. Also, in case of a leak, it warns you of the coolant stage being beneath its optimum worth. It attaches to the tube of the EK tubular-style reservoirs and connects through a devoted cable to the EK-Loop Connect management unit.
EK-Loop Connect – USB External Cable (1 m)
This easy cable will enable the consumer to attach their EK-Loop Connect controller unit to the PC through a typical USB connector that may be discovered on the again of the motherboard. This sort of connection is useful to modders as a result of it permits them to pre-program the controller utilizing one other PC. This additionally makes it doable to run the pump, fan, and RGB settings on one other PC with out the necessity to set up an OS. This saves quite a lot of time and nonetheless lets the consumer management RGB patterns for the wants of the video shoots, and so on.
EK-Loop Connect Software 1.3.11
To run the most recent model of the Connect controller software program, it’s best to uninstall all earlier software program variations utterly. There have been a couple of essential adjustments to the software program, lots of minor bugs have been mounted, and the general stability was enormously improved. The change-log with crucial particulars is as follows:
- Application checks for updates on app startup. The replace verify can be performed within the Support/Settings tab.
- By urgent the app shut button, the appliance now minimizes to tray. It will be closed by right-clicking on the tray icon and selecting Exit.
- Controller detection retry is added.
- Users can change the temperature supply for controlling the PWM (CPU/GPU/T1/T2/T3).
- An choice to set the temperature vary and colours for the Smart RGB profile is added.
- The data from the Extended tab is added to the Dashboard tab whereas the Extended tab is eliminated.
- Two further factors to the PWM curve within the customized profile are added.
- The cooling profile title is written underneath every fan header on the Dashboard.
- RGB quantity worth enter and HEX worth enter are added.
- PWM settings are saved and…
