The EK-Quantum Vector FTW3 RTX D-RGB sequence high-performance water blocks are specifically designed for EVGA FTW3 variations of NVIDIA GeForce RTX 2080 and 2080 Ti graphics playing cards. The water blocks use the signature EK single slot slim look, they usually cowl the whole PCB size. This subtle cooling resolution will rework your highly effective EVGA graphics card right into a minimalistic, elegant piece of {hardware} with accented D-RGB (addressable) LED lighting. The block additionally includes a distinctive aesthetic cowl over the block Terminal which is designed to showcase the graphics card mannequin by way of addressable LEDs, seen from the aspect.
These water blocks immediately cool the GPU, VRAM and the VRM (voltage regulation module) as cooling liquid is channeled immediately over these vital areas. EK-Vector water blocks function a redesigned cooling engine that has a bigger footprint in comparison with the earlier technology of EK Full Cover water blocks. This ends in a bigger floor space for warmth switch which will increase the thermal efficiency of those water blocks.
The EK Vector Series water blocks use an Open Split-Flow cooling engine design which proved to be a superior resolution for GPU water blocks. It is characterised by low hydraulic move restriction, which implies that it may be used with weaker water pumps, or pumps working on low-speed settings and nonetheless obtain high efficiency. The jet plate and fin construction geometry have been optimized to supply even move distribution with minimal losses and optimum performances even when utilized in reversed water move situations.
The base of the block is CNC machined out of nickel-plated electrolytic copper whereas the highest is CNC machined out of glass-like acrylic materials or sturdy black POM acetal relying in your mannequin of selection. Sealing is ensured by high-quality EPDM O-rings. The brass standoffs are already pre-installed and permit for a protected and simple set up process.
The block is already geared up with 3-pin 5V D-RGB LED strips that are suitable with the motherboard 3-pin 5V D-RGB (addressable) LED headers. This product is suitable with widespread D-RGB sync applied sciences from all main motherboard producers.
EK recommends the acquisition of a retention backplate which improves the aesthetics of your graphics playing cards, but additionally gives further passive cooling to the GPU core and circuit board VRM part.
G1/4″ threaded fittings can be utilized on either side of the terminal and for a number of GPU connectivity, please consult with our provide of GPU Terminals.
Both the NVIDIA and EVGA NVLink are suitable with these water blocks.
Compatibility
EK-Quantum Vector FTW3 RTX 2080 Ti D-RGB water blocks are suitable with EVGA FTW3 GeForce RTX 2080 Ti graphics playing cards primarily based on Turing graphics processors.
EK-Quantum Vector FTW3 RTX 2080 Ti D-RGB water blocks are suitable with EVGA FTW3 GeForce RTX 2080 graphics playing cards primarily based on Turing graphics processors.
EK-Vector FTW3 RTX Backplates
EK-Vector FTW3 RTX sequence water blocks are suitable with the corresponding the EK-Vector FTW3 RTX backplates that passively cool the graphics chip and VRM from the again aspect of the PCB. The EK-Vector FTW3 RTX backplates are fabricated from high-quality Aluminiium and are available in nickel-plated and anodized black variants. The EK-Vector FTW3 RTX sequence water blocks usually are not suitable with manufacturing facility backplates.
EK-Quantum Vector FTW3 RTX 2080 Upgrade Kits
An addressable D-RGB improve equipment for present EK-Vector FTW3 RTX high-performance full-cover water blocks. The improve equipment features a black stick out piece with a typical 3-pin 5 V D-RGB addressable LED strip and a brand new terminal…
