EK-Quantum Vector RTX FE 3070 water block is appropriate with Founders Edition GeForce RTX 3070 graphics playing cards. It is purpose-designed with a a lot thicker copper base to clear the tall parts on the cardboard. This sort of design additionally permits the terminal to be screwed straight onto the copper chilly plate of the GPU block, making it extra inflexible and lowering the possibilities of damaging the water block. EK-Quantum Vector RTX FE 3070 incorporates a distinctive acrylic terminal situated within the far finish of the GPU, making the entire enclosure slimmer and excellent for small type issue instances.
This Vector water block straight cools the GPU, VRAM, and the VRM (voltage regulation module) as a cooling liquid is channeled proper over these essential areas. The water block is in touch with MOSFETs and chokes to maximise cooling and reduce the possibilities of coil whine. It additionally options optimized circulation paths that scale back hydrodynamic instabilities and vortexing (lifeless spots) within them.
The EK-Quantum Vector FE Series water blocks use an Open Split-Flow cooling engine design, which proved to be a superior resolution for GPU water blocks. It is characterised by low hydraulic circulation restriction, that means it may be used with weaker water pumps or pumps operating on low-speed settings and nonetheless obtain high efficiency. The jet plate and fin construction geometry have been optimized to supply even circulation distribution with minimal losses and optimum efficiency when utilized in any given coolant circulation orientation.
The aesthetic end-piece is housing the addressable D-RGB LED strip on the Plexi mannequin. This water block model boasts a complete of 5 individually addressable RGB LEDs, and it is appropriate with widespread RGB sync applied sciences from all main motherboard producers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header.
EK recommends the acquisition of a retention backplate, which improves the general aesthetics of your graphics playing cards, and in addition gives further passive cooling for the GPU core and bottom of the printed circuit board VRM part.
Availability and Pricing
The EK-Quantum Vector FE RTX 3070 water blocks and backplates are made and assembled in Slovenia, Europe. These water blocks are actually out there for pre-order by means of the EK Webshop and devoted reseller community and are anticipated to ship out in late January.
