PHOTTIX has made available a new firmware package compatible with its Odin II TTL Trigger for Sony unit, namely version 1.01, which fixes the shutter button on Sony cameras where the Odin II wasn’t able to trigger Strato II receiver or Mitros+, Indra500, or Indra360 in Strato II RX mode.
Therefore, if you have encountered this issue and want to get rid of it, save and extract the downloadable archive, run the available setup, connect the TTL flash via USB, and make sure it’s turned on. Now, click the “Version” icon and check whether the currently installed firmware isn’t identical or newer to this release.
If all is OK, then click the “Software” icon, navigate and select the .FDS file from the newly-extracted folder, and wait for the new version to be applied.
Upon completion, an “Update OK” message will be displayed, at which point you must simply disconnect the Odin II unit from the computer, and that’s all.
However, make sure that during the installation the USB cable is not be removed, the flash’s buttons aren’t used, and the computer and the Odin II unit aren’t powered off. Doing so will not only crash the upgrade, but also cause serious device malfunctions.
With this in mind, download PHOTTIX Odin II for Sony Firmware 1.01, follow all instructions highlighted above to properly apply the current firmware, and constantly check our website to stay up to speed with the latest releases.
