Download ClockTuner for Ryzen (CTR), Guru3D is the official obtain companion for this useful utility that may probably increase ZEN2 processor efficiency in your PC.
CTR (ClockTuner for Ryzen) software program permits every person to customise the system with most vitality effectivity. In this case, CTR is totally automated and doesn’t restrict the person in actions. The program has a type of synthetic intelligence, which is able to assist in any scenario, and the safety system will monitor every step in order that your parts weren’t uncovered to hazard. CTR is appropriate with all motherboards on the AM4 socket, regardless of the factitious limitations of AMD. As for situations, it’s most likely one factor – the processor ought to be based mostly on Zen 2 structure. CTR is made by Guru3D’s oldtimer 1USMUS.
Please learn the information earlier than utilization on tips on how to use and setup ClockTuner for Ryzen., critically try this.
The primary precept of this software program is to judge the standard of every CCX and alter the frequencies individually. Prime95 with various particular presets assesses the steadiness of every CCX. A step-by-step frequency algorithm with a number of guidelines means that you can choose probably the most secure frequency for all CCX concurrently with out disturbing the vitality steadiness between the CCX. CTR additionally comprises a plug-in (non-obligatory) check bundle Cinebench R20 from Maxon, which is able to consider the outcomes of the tuning.
System necessities and preparation for work
- Windows 10 x64 1909-2004 construct;
- AMD Ryzen processor with Zen 2 structure (Renoir is quickly not supported);
- BIOS with AGESA Combo AM4 1.0.0.4 (and newer);
- .NET Framework 4.6 (and newer);
- CPU Voltage – Auto (BIOS);
- CPU Multiplayer – Auto (BIOS);
- SVM (Virtualization) – disabled (BIOS, non-obligatory);
- Spread Spectrum – disabled (BIOS, non-obligatory);
- Ryzen Master 2.3 (makes use of the driving force for monitoring);
- Stable RAM overclocking or secure XMP.
The subsequent set of necessities are additionally necessary and apply to UEFI (BIOS) settings. Since the success of CTR relies upon closely on the capabilities of the motherboard VRM (extremely really helpful to learn this chapter – hyperlink), we have to make a type of basis within the UEFI (BIOS) to safe the method of tuning the system from BSOD.
The most essential setting is LLC (Load Line Calibration), my suggestions are as follows:
- ASUS – LLC Three or LLC 4;
- MSI – LLC 3;
- Gigabyte – typically Turbo, nevertheless it may also be Auto;
- ASRock is Auto or LLC 2; Importantly, CTR is mediocre appropriate with ASRock motherboards, as all LLC modes present abnormally excessive Vdroop;
- Biostar – Level 4+.
It is really helpful to make use of further settings for ASUS motherboard homeowners:
- Phase mode – Standard;
- Current functionality mode – 100%;
How to put in CTR
- Download the CTR archive (obtain) and unpack it in a handy place for you.
- Download and set up Ryzen Master 2.3 (obtain)
- Download Cinebench R20 (obtain) archive and extract the archive contents to the “CB20” folder (this folder is situated within the CTR folder).
- Run Cinebench R20, settle for the license settlement, shut Cinebench R20.
CTR is able to work. Questions or ideas? You can ask them in this discussion board matter.
CTR 1.Zero beta 2
- Fixed “Diagnostic” mode. A lot of enhancements ought to make prognosis extra secure and intelligent. Also barely elevated diagnostic time.
- Fixed LLC warnings.
- OC suggestions (reference voltage and reference frequency) have been modified for some processors.
- CTR now is aware of, tips on how to notify the person if an issue is detected within the monitoring system.
- New! Ramping system. This system is supplied to elongate the ramp time and reduce the present in-rush. An try to avoid wasting the system from BSOD.
- New! Voltage compensation. A system that may compensate Vdroop on the ultimate stage of overclocking or undervolting. An try to avoid wasting the system from BSOD.
- Fixed (partially) a uncommon bug “CTR does not start”.
- Fixed irregular Cinebench R20 outcomes (voltage or energy consumption).
- Fixed a uncommon bug “Problems with reading CBlog.log”.
- “EDIT PROFILE”. Additional safety of textual content fields from incorrect actions.
- Changed “CCX delta” (default) for Ryzen 9 3900X.
